Samsung M262x Benutzerhandbuch (en)

Herunterladen
Wired network setup
105
2.  Using a Network-Connected Machine
Setting IP address
First, you have to set up an IP address for network printing and managements. 
In most cases a new IP address will be automatically assigned by a DHCP 
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control 
Panel > Security Center > Windows Firewall.
 
The following instructions may differ for your model. 
 
1
Download the software from the Samsung website then unpack and 
install it: (http://www.samsung.com > find your product > Support or 
Downloads).
Follow the instructions in the installation window.
Connect your machine to the network with a network cable.
Turn on the machine.
From the Windows Start menu, select All Programs > Samsung 
Printers
 > SetIP > SetIP.
Click the 
 icon (third from left) in the SetIP window to open the TCP/IP 
configuration window.
Enter the machine’s new information into the configuration window. In 
a corporate intranet, you may need to have this information assigned by 
a network manager before proceeding.
 
Find the machine’s MAC address from the Network Configuration Report 
(see "Printing a network configuration report" on page 104) and enter it 
without the colons. For example, 00:15:99:29:51:A8 becomes 
0015992951A8.
 
Click Apply, and then click OK. The machine will automatically print the 
Network Configuration Report. Confirm that all the settings are 
correct.