Samsung M262x Benutzerhandbuch (en)

Herunterladen
Wireless network setup
142
2.  Using a Network-Connected Machine
1
Check whether or not the network cable is connected to the machine. If 
not, connect the machine with a standard network cable.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter 
your machine’s new IP address in the browser window.
For example,
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login. We recommend you to 
change the default password for security reasons.
ID: admin 
Password: sec00000
When the SyncThru™ Web Service window opens, click Network 
Settings
.
Click Wireless > Wizard.
 
Wizard will help you setup the wireless network configuration. However, if 
you want to set the wireless network directly, select Custom.
 
Select the one Network Name(SSID) in the list.
SSID: SSID (Service Set Identifier) is a name that identifies a wireless 
network, access points, and wireless devices attempting to connect 
to a specific wireless network must use the same SSID. The SSID is 
case sensitive.
Operation ModeOperation Mode refers to the type of wireless 
connections (see "Wireless network name and network password" 
on page 118).
-
Ad-hoc: Allows wireless devices to communicate directly with 
each other in a peer-to-peer environment.
-
Infrastructure: Allows wireless devices to communicate with 
each other through an access point.
 
If your network’s Operation Mode is Infrastructure, select the SSID of the 
access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. 
 
Click Next.
If the wireless security setting window appears, enter the registered 
password (network password) and click Next.
The confirmation window appears, please check your wireless setup. If 
the setup is right, click Apply.