Samsung M262x Benutzerhandbuch (en)

Wireless network setup
2.  Using a Network-Connected Machine
Disconnect the network cable (standard or network). Your machine should 
then start communicating wirelessly with the network. In case of Ad-hoc 
mode, you can use a wireless LAN and wired LAN simultaneously.
Insert the supplied software CD into your CD-ROM drive, and follow the 
instructions in the window to set up the wireless network.
Turning the Wi-Fi network on/off
If your machine has a display, you can also turn on/off the Wi-Fi from the 
machine’s control panel using the Network menu.
Check whether the network cable is connected to the machine. If not, 
connect the machine with a standard network cable.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter 
your machine’s new IP address in the browser window.
For example,
Click Login on the upper right of the SyncThru™ Web Service website.
If it’s your first time logging into SyncThru™ Web Service you need to 
log-in as an administrator. Type in the below default ID and password. 
We recommend you to change the default password for security 
ID: admin 
Password: sec00000 
When the SyncThru™ Web Service window opens, click Network 
Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.