Samsung M262x Benutzerhandbuch (en)

Herunterladen
Printing problems
203
5.  Troubleshooting
The machine prints, but 
the text is wrong, 
garbled, or incomplete.
The machine cable is loose or defective.
Disconnect the machine cable and reconnect. Try a print job that you have already 
printed successfully. If possible, attach the cable and the machine to another computer 
that you know works and try a print job. Finally, try a new machine cable.
The wrong printer driver was selected.
Check the application's printer selection menu to ensure that your machine is selected.
The software application is malfunctioning.
Try printing a job from another application.
The operating system is malfunctioning.
Exit Windows and reboot the computer. Turn the machine off and back on again.
If you are in a DOS environment, the font setting 
for your machine may be set incorrectly.
Changing the font setting. You can set the font from Device Settings in Samsung Easy 
Printer Manager program (see "Device Settings" on page 189).
Pages print, but they are 
blank.
The toner cartridge is defective or out of toner.
Redistribute the toner, if necessary. 
If necessary, replace the toner cartridge.
The file may have blank pages.
Check the file to ensure that it does not contain blank pages.
Some parts, such as the controller or the board, 
may be defective.
Contact a service representative.
The machine does not 
print PDF files correctly. 
Some parts of graphics, 
text, or illustrations are 
missing.
Incompatibility between the PDF file and the 
Acrobat products.
Printing the PDF file as an image may enable the file to print. Turn on Print As Image 
from the Acrobat printing options. 
 
It will take longer to print when you print a PDF file as an image.
 
The print quality of 
photos is not good. 
Images are not clear.
The resolution of the photo is very low. 
Reduce the photo size. If you increase the photo size in the software application, the 
resolution will be reduced. 
Condition
Possible cause
Suggested solutions