Samsung M262x Benutzerhandbuch (en)

1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer 
using the cable. If your machine is attached to a network, skip the following 
steps below and go on to installing a network connected machine’s driver (see 
If you are a Mac, Linux, or Unix OS user, refer to the "Software Installation" 
on page 97.
The installation window in this 
User’s Guide
 may differ depending on the 
machine and interface in use.
Only use a USB cable no longer than 3 meters (118 inches).
Make sure that the machine is connected to your computer and 
powered on.
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs > 
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
For Windows 8,
If the installation window does not appear, from Charms, select 
Search > Apps and search for Run. Type in X:\Setup.exe, replacing 
“X” with the letter that represents your CD-ROM drive and click OK.
If “Tap to choose what happens with this disc.” pop-up window 
appears, click the window and select Run Setup.exe.
Review and accept the installation agreements in the installation 
window. Then, click Next.
Select USB connection on the Printer Connection Type screen. Then, 
click Next.
Follow the instructions in the installation window.