Canon MP970 Quick Setup Guide (en)

Download
Windows
Macintosh
 
XXXXXXXX 
PRINTED IN THAILAND
Windows
®
 Software Installation
 Note
The screens below refer to Windows Vista™ operating system Ultimate Edition 
(hereafter referred to as “Windows Vista”) installation. 
Screens may vary depending on the operating system you are using.
Log into a user account with the administrator privilege.
Before installing the software, disable all anti-virus programs and automatically 
loading programs.
A message asking for your confirmation to restart your computer may appear 
during the installation process. If this message is displayed, follow the on-screen 
instructions and click 
OK
The installation resumes from where it left off when your computer has been 
restarted.
If the computer is restarted during installation, do not remove the Setup CD-ROM 
during restarting.
a
 Be sure to 
TURN THE MACHINE OFF before continuing.
(1)  Press the 
ON/OFF button.
(2)  Make sure that the 
Power lamp stops flashing.
b
 Turn the computer on and start Windows.
 Important
If the Found New Hardware or Found New Hardware Wizard screen appears 
automatically, remove the USB cable connected to your computer. Click Cancel 
to quit the screen. In Windows Vista, the screen may close automatically when 
the USB cable is unplugged. Then turn off the machine and proceed from step 
c
 to install the software.
c
 Insert the Setup CD-ROM. The setup program should run 
automatically.
In Windows Vista, go to Step 
d
. In Windows XP and Windows 2000, go to 
Step 
f
.
d
 If the 
AutoPlay screen appears, click Run Msetup4.exe.
e
 If the 
User Account Control screen appears, click Continue
If the same screen reappears in subsequent steps, click 
Continue.
f
 When the main menu appears, click 
Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed 
automatically.
 Note
If you want to select particular items to install, click 
Custom Install and follow the on-
screen instructions to proceed with the installation.
g
 When the list of applications to install appears, confirm the 
contents and click 
Install.
 Note
Move the cursor over items to display explanations of each application.
h
 Read the License Agreement carefully and click 
Yes. The 
software installation screen may appear during the installation 
process. Follow the on-screen instructions to install the 
software.
i
 When the 
Setup Method screen appears, select Use the 
printer via USB, then click Next.
j
 When the 
Printer Connection screen appears, connect 
one end of the USB cable to the computer, the other to the 
machine, then 
TURN THE MACHINE ON. The software will 
begin identifying the printer port being used.
 Important
If you cannot go to the next procedure after three minutes, refer to “Cannot 
Install the MP Drivers” in the Quick Start Guide.
To Computer
USB
When using Windows 2000: 
When you connect the machine to the computer with a USB cable, a 
message asking for your confirmation to restart your computer is displayed. 
Click 
Yes. Then when an error message is displayed, click OK to proceed 
with the installation.
k
 When the 
Setup Complete screen appears, click Next.
l
 When the 
User Registration screen appears, click Next.
 Note
To register later, click 
Cancel and go to Step 
m
. After software installation is complete, 
double-click 
 on the desktop.
Follow the on-screen instructions to register your product. You will need your 
product serial number, which is located on the inside of the machine. See 
Step 1- 
f
 on the front page.
m
 When the 
PIXMA Extended Survey Program screen 
appears, confirm the message. We would appreciate it if you 
would take part in this program regarding the use of Canon 
printers. If you can agree, click 
Agree.
n
 When the 
Installation completed successfully screen 
appears, click 
Exit.
After clicking 
Exit, remove the CD-ROM.
If 
Restart is displayed, make sure that the Restart the system now 
(recommended) check box is selected, then click Restart
Remove the CD-ROM after clicking 
Restart and restarting the computer.
 Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
Macintosh
®
 Software Installation
 Note
Since Mac
®
 OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier 
are not supported, do not connect the machine to these.
The screens below refer to Mac OS X v.10.4.x installation. Screens may vary 
depending on the operating system you are using.
Log on as an Administrator.
Before installing the software, disable all anti-virus programs and automatically 
loading programs.
a
 Connect one end of the USB cable to the computer and the 
other to the machine.
 Note
Make sure the machine is turned on.
USB
b
 Turn on your Mac and insert the Setup CD-ROM.
 
 Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon   
on the desktop.
c
 Double-click the 
Setup icon.
d
 When the 
Authenticate screen appears, enter your 
administrator name and password. Click 
OK
If you do not know your administrator name or password, click 
, then follow the on-screen instructions.
e
 When the main menu appears, click 
Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed 
automatically.
 Note
If you want to select particular items to install, click 
Custom Install and follow the on-
screen instructions to proceed with the installation.
f
 When the list of applications to install appears, confirm the 
contents, then click 
Install.
 Note
Move the cursor over items to display explanations of each application.
g
 Read the License Agreement carefully and click 
Yes. The 
software installation screen may appear during the installation 
process. Follow the on-screen instructions to install the 
software. 
h
 When the 
Setup Complete screen appears, click Next.
i
 When the 
User Registration screen appears, click Next.
 Note
To register later, click 
Cancel and go to Step 
j
. After software installation is complete, 
double-click 
on the desktop.
Follow the on-screen instructions to register your product. You will need your 
product serial number, which is located on the inside of the machine. See 
Step 1- 
f
 on the front page.
j
 When the 
Installation completed successfully screen 
appears, click 
Restart.
Remove the CD-ROM after clicking 
Restart and restarting the computer.
 
 Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
When the computer restarts, the Canon IJ Network Tool will start up 
automatically.
When using Mac OS X v.10.2.8 to v.10.3.3: 
Restarting the computer while connected to the machine may cause the 
machine not to be detected. To resolve this, either unplug the USB cable 
then plug it back in again, or turn the machine off then back on again.
 Note
When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on 
the machine to save scanned originals to the computer, it is necessary to select 
MP 
Navigator EX as the launch application on Image Capture under Applications. For 
details, refer to “Scanning Images” in the User’s Guide on-screen manual.
k
 When the 
Canon IJ Network Tool screen appears, select 
USB connection, then click OK.
Software installation is now complete.
Part no. 
QT5-1178-V01 © 2007 Canon Inc. “Microsoft” is a registered trademark of Microsoft Corporation. “Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other countries. “Windows Vista” is a trademark of Microsoft Corporation. “Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other countries.
USB connection is explained here. For wired LAN connection, refer to the Network Setup Guide.