Canon sx260hs User Manual (en)

Download
Specific Scenes
98
Aim the camera at a person and press the shutter button all the way down. 
The camera will shoot about two seconds after a wink is detected.
Choose .
z
Follow steps 1 – 2 on p. 93 and choose 
and then press the 
l button.
z
Press the 
qr buttons or turn the 5 dial to 
choose 
, and then press the 
l button.
Compose the shot and press the 
shutter button halfway.
z
Make sure a green frame is displayed around 
the face of the person who will wink.
Press the shutter button all the way 
down.
X
The camera now enters shooting standby 
mode, and [Wink to take picture] is displayed.
X
The lamp blinks and the self-timer sound is 
played.
Face the camera and wink.
X
The camera will shoot about two seconds 
after detecting a wink by the person whose 
face is inside the frame.
z
To cancel shooting after you have triggered 
the self-timer, press the 
n button.
Using the Wink Self-Timer
If the wink is not detected, wink again slowly and deliberately.
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
Closing and opening both eyes at once will also be detected as a wink.
If winking is not detected, the camera will shoot about 15 seconds later.
To change the number of shots, press the 
op buttons after choosing 
 in 
step 1. [Blink Detection] (p. 86) is only available for the final shot.
If no one is in the shooting area when the shutter button is pressed all the way 
down, the camera will shoot after a person enters the shooting area and winks.
COP
Y