Panasonic DMC-FX9 User Manual (en)

Download
Preparation
20
VQT0S57
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is 
shipped. When you turn the camera on, the 
following screen appears.
• When pressing the [MENU] button, the 
screen shown in step 1 appears.
• The screen disappears after about 
5 seconds. Turn the camera on again or 
press the [MENU] button, select [CLOCK 
SET] in page 2/3 of the [SETUP] menu 
(P21) and set the clock in steps 1 and 2.
1 Set date and time.
2/1: Select the desired item.
3/4: Set date and time.
2 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the 
[MENU] button 2 times after finishing 
the setting.
• Check if the clock setting is correct, 
after turning the camera off and on.
• When a fully charged battery has been 
inserted for more than 24 hours, the clock 
setting is stored (in the camera) for at 
least 3 months even if the battery is 
removed. (The storing time may be 
shorter if the battery is not charged 
sufficiently.)
If more than 3 months has passed, the 
clock setting will be lost. In this case, set 
the clock again.
• You can set the year from 2000 to 2099. 
The 24-hour system is used.
• When you use a photo printing service, if 
the date is not set in the camera, it will not 
be printed, even if the store provides a 
date printing option to your photo.
• For the date print setting, refer to P84.
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2005
.
.
0
0 00
:
CLOCK SET
EXIT
MENU
SET
SELECT
EXIT
10:00
1
DEC.
1
1.2005
MENU
M/D/Y
CLOCK SET
SET
SELECT