Panasonic DMC-FX9 User Manual (en)

Download
Connecting to a PC or Printer
94
VQT0S57
Connecting to a PC
You can load pictures recorded with the 
camera to a PC by connecting the camera 
and PC.
The software [LUMIX Simple Viewer] 
(for Windows
®
) in the CD-ROM (supplied) 
allows you to load pictures recorded with 
the camera to a PC, print, or send them by 
e-mail easily.
If you use Windows
 
98/98SE, install the 
USB driver and then connect it to the 
computer.
For details of [LUMIX Simple Viewer] and 
installation, refer to the separate operating 
instructions for PC connection.
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5; optional)
• Turn off the camera before inserting or 
removing the cable for the AC adaptor 
(DMW-AC5; optional).
1 Turn the camera on and then set 
[USB MODE] on the [SETUP] 
menu to [PC]. (P93)
• If you set [USB MODE] to [PictBridge 
(PTP)] and then connect the camera to 
the PC, messages may appear on the 
screen of the PC.
Select [Cancel] to close the indications 
and disconnect the camera from the 
PC. Connect the camera after you set 
[USB MODE] again.
2 Connect the camera to a PC via 
the USB connection cable 
A 
(supplied).
• Connect the USB connection cable with 
the [
] mark facing the [
2] mark on 
the [DIGITAL] socket.
• Hold the USB connection cable at 
and insert straight in and take straight 
out. (Forcibly inserting at a slant or 
upside down can deform the pins, and 
this can damage the camera or other 
connected equipment.)
D: This message appears during data 
transfer.
[Windows]
The drive appears on the [My Computer] 
folder.
• If it is the first time you are connecting the 
camera to a PC, the required driver is 
installed automatically so that the camera 
can be recognized by the Windows Plug 
and Play, then it appears on the 
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen as 
[NO_NAME] or [Untitled].
AV OUT
DIGITAL
DC IN
ACCESS