Panasonic DMC-FX9 User Manual (en)

Download
Connecting to a PC or Printer
96
VQT0S57
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing 
on the LCD monitor.
Set the print settings such as print quality 
on the printer beforehand. (Read the printer 
operating instructions.)
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5; optional)
• Turn off the camera before inserting or 
removing the cable for the AC adaptor 
(DMW-AC5; optional).
1 Turn the camera on and then set 
[USB MODE] on the [SETUP] 
menu to [PictBridge (PTP)]. (P93)
2 Turn on the printer.
3 Connect the camera to a printer 
via the USB connection cable 
A 
(supplied).
• Connect the USB connection cable with 
the [
] mark facing the [
2] mark on 
the [DIGITAL] socket.
• Hold the USB connection cable at 
and insert straight in and take straight 
out.
• It may take time to print some pictures. 
Therefore, use a battery with sufficient 
battery power (P14) or the AC adaptor 
(DMW-AC5; optional) when you connect 
to a printer.
• If the remaining battery power becomes 
low during communication, the battery 
indication turns red and blinks (P14) and 
the alarm beeps. In this case, stop the 
communication at once.
• Disconnect the USB connection cable 
after printing.
• Do not use any other USB connection 
cables except the supplied one.
• For printing the age in [BABY] (P60) in 
scene mode, print from a PC using the 
software [LUMIX Simple Viewer] in the 
CD-ROM (supplied). For details, refer to 
the separate operating instructions for PC 
connection.
• To find out more PictBridge compliant 
printers, please contact your local dealer.
AV OUT
DIGITAL
DC IN
When the DPOF 
Print is not set.
Select [SINGLE 
PICTURE]. (P97)
When the DPOF 
Print is set. (P83)
Select [DPOF 
PICTURE]. (P98)