Samsung l55 User Manual (en)

Instructions on how to use the memory card
ƃ Be sure to format the memory card (see p.99) if you are using a newly purchased memory for
the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
ƃ Turn off the camera power whenever the memory card is being inserted or removed.
ƃ Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card. 
Wear and tear on the memory card is not covered by the Samsung warranty.
ƃ The memory card is an electronic precision device. 
Do not bend, drop or subject the memory card to any heavy impact.
ƃ Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
ƃ Please do not use or store in an environment where there are extremes in temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any liquid. 
Should this happen, clean the memory card with a soft cloth.
ƃ Please keep the memory card in its case when not in use.
ƃ During and after periods of extended use, you may notice that the memory card is warm. 
This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this camera. 
ƃ Do not use a memory card formatted by another digital camera or memory card reader.
ƃ If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
ƃ If there is insufficient memory available 
: A [CARD FULL! / MEMORY FULL!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or delete
unnecessary images stored on the memory.