Nikon D300 User Manual (en)

Download
137
r
3
Select direct measurement mode.
Release the WB button briefly and then 
press the button until the 
L icon in 
the control panel and viewfinder start 
to flash. A flashing 
D will also appear 
in the control panel and viewfinder. At 
default settings, the displays will flash 
for about six seconds.
4
Measure white balance.
Before the indicators stop flashing, frame the 
reference object so that it fills the viewfinder and 
press the shutter-release button all the way down. The camera 
will measure a value for white balance and store it in preset 
d-0. No photograph will be recorded; white balance can be 
measured accurately even when the camera is not in focus.
5
Check the results.
If the camera was able to measure a 
value for white balance, 
C will flash 
in the control panel, while the 
viewfinder will show a flashing 
a. At 
default settings, the displays will flash 
for about six seconds.
Viewfinder
Control panel
Viewfinder
Control panel