Nikon D300 User Manual (en)

Download
295
U
6
Compose the shot.
Compose the shot and arrange the flash units as shown below. 
Note that the maximum distance at which the remote flash 
units can be placed may vary with shooting conditions.
7
Set the remote flash units to the selected channel.
Turn all the remote flash units on and set them to the channel 
selected in Step 4. See the Speedlight instruction manuals for 
details.
8
Raise the built-in flash.
Press the flash pop-up button to raise the built-in flash. Note 
that even if [– –] is selected for [Built-in flash]>[Mode], the 
built-in flash must be raised so that monitor preflashes will be 
emitted.
9
Frame the photograph, focus, and shoot.
After confirming that the camera flash-ready light and the 
flash-ready lights for all other flash units are lit, frame the 
photograph, focus, and shoot. FV lock (pg. 178) can be used if 
desired.
10 m/33 ft.
or less
30 ° or less
30 ° or less
60 ° or less
60 ° or less
5 m/15 ft. or 
less
Camera
(built-in flash)
5 m/15 ft. or 
less
Wireless remote 
sensors on flash 
units should face 
camera.