Nikon D300 User Manual (en)

Download
308
U
f8: Release Button to Use Dial
This option allows adjustments that are normally made by holding 
a button and rotating a command dial to be made by rotating the 
command dial after the button is released. At the default setting 
of [No], the button must be pressed while the command dial is 
rotated. If [Yes] is selected, the setting can be changed by rotating 
the command dial after the button is released. Setting ends when 
the button is pressed again, the shutter-release button is pressed 
halfway, or any of the 
I, E,  M, ISOQUAL, or WB button is pressed. 
Except when [No limit] is selected for Custom Setting c2 [Auto 
meter-off delay] or an optional EH-5a or EH-5 AC adapter is used, 
setting will also end when the exposure meters turn off.
Menus 
and 
playback
At the default setting of [Off ], the multi selector is used to 
choose the picture displayed during full-frame playback, 
highlight thumbnails, and navigate menus. If [On] is selected, 
the main command dial can be used to choose the picture 
displayed during full-frame playback, move the cursor left or 
right during thumbnail playback, and move the menu 
highlight bar up or down. The sub-command dial is used to 
display additional photo information in full-frame playback 
and to move the cursor up or down during thumbnail 
playback. While menus are displayed, rotating the sub-
command dial right displays the sub-menu for the selected 
option, while rotating it left displays the previous menu. To 
make a selection, press 
2, the center of the multi selector, or 
J. 
Option
Description