Nikon D800 User Manual (en)

Download
En_03
144
Z
❚❚Canceling Bracketing
To cancel bracketing, press the 
D button and rotate the main 
command dial until the number of shots in the bracketing 
sequence is zero (r) and d is no longer displayed. The 
program last in effect will be restored the next time bracketing is 
activated. Bracketing can also be cancelled by performing a two-
button reset (
program will not be restored the next time bracketing is activated.
A
ADL Bracketing
In continuous low speed and continuous high speed modes, shooting 
will pause after the number of shots specified in the bracketing 
program have been taken. Shooting will resume the next time the 
shutter-release button is pressed.  In self-timer mode, the camera will 
take the number of shots selected in Step 2 on page 141 each time the 
shutter-release button is pressed, regardless of the option selected for 
Custom Setting c3 (Self-timer) > Number of shots (
between shots is however controlled by Custom Setting c3 (Self-timer
Interval between shots.  In other modes, one shot will be taken each 
time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been 
taken, shooting can be resumed from the next shot in the sequence 
after the memory card has been replaced or shots have been deleted to 
make room on the memory card. If the camera is turned off before all 
shots in the sequence have been taken, bracketing will resume from the 
next shot in the sequence when the camera is turned on.