Nikon D800 User Manual (en)

Download
En_03
211
t
❚❚Interrupting Time-Lapse Photography
Time-lapse photography will end automatically if the battery is 
exhausted. The following will also end time-lapse photography:
• Selecting Start > Off in the Time-lapse photography menu
• Pressing the 
J button between frames or immediately after a 
frame is recorded
• Turning the camera off
• Removing the lens
• Connecting a USB or HDMI cable
• Inserting a memory card into an empty slot
• Pressing the shutter-release button all the way down to take a 
photograph
A movie will be created from the frames shot to the point where 
time-lapse photography ended. Note that time-lapse 
photography will end and no movie will be recorded if the power 
source is removed or disconnected or the destination memory 
card is ejected.
❚❚No Photograph
The camera will skip the current frame if the camera is unable to 
focus in AF-S (note that the camera focuses again before each shot). 
Shooting will resume with the next frame.
A
Image Review
The 
K button can not be used to view pictures while time-lapse 
photography is in progress, but the current frame will be displayed for a 
few seconds after each shot if On is selected for Image review in the 
playback menu (
0 265). Other playback operations can not be 
performed while the frame is displayed.
A
See Also
For information on setting a beep to sound when time-lapse 
photography is complete, see Custom Setting d1 (Beep