Nikon D800 User Manual (en)

Download
En_03
305
U
6
Compose the shot.
Compose the shot and arrange the flash units as shown below. 
Note that the maximum distance at which the remote flash 
units can be placed may vary with shooting conditions.
7
Configure the remote flash units.
Turn all the remote flash units on, adjust group settings as 
desired, and set them to the channel selected in Step 4. See 
the flash unit instruction manuals for details.
8
Raise the built-in flash.
Press the flash pop-up button to raise the built-in flash. Note 
that even if – – is selected for Built-in flash > Mode, the built-
in flash must be raised so that monitor preflashes will be 
emitted.
9
Frame the photograph, focus, and shoot.
After confirming that the camera flash-ready light and the 
flash-ready lights for all other flash units are lit, frame the 
photograph, focus, and shoot. FV lock (
0 190) can be used if 
desired.
10 m/
33 ft or less
60 ° or less
60 ° or less
30 ° or 
less
30 ° or 
less
5 m/
15 ft or less
5 m/
15 ft or less
Wireless remote 
sensors on flash 
units should face 
camera.