Nikon D800 User Manual (en)

Download
En_03
403
n
Turn the product off before removing or disconnecting the power source
: Do not 
unplug the product or remove the battery while the product is on or while 
images are being recorded or deleted. Forcibly cutting power in these 
circumstances could result in loss of data or in damage to product memory 
or internal circuitry. To prevent an accidental interruption of power, avoid 
carrying the product from one location to another while the AC adapter is 
connected.
Notes on the monitor
: The monitor is constructed with extremely high 
precision; at least 99.99% of pixels are effective, with no more than 0.01% 
being missing or defective. Hence while these displays may contain pixels 
that are always lit (white, red, blue, or green) or always off (black), this is not 
a malfunction and has no effect on images recorded with the device.
Images in the monitor may be difficult to see in a bright light.
Do not apply pressure to the monitor, as this could cause damage or 
malfunction. Dust or lint on the monitor can be removed with a blower. 
Stains can be removed by wiping lightly with a soft cloth or chamois 
leather. Should the monitor break, care should be taken to avoid injury 
from broken glass and to prevent liquid crystal from the monitor touching 
the skin or entering the eyes and mouth.
Replace the monitor cover when transporting the camera or leaving it 
unattended.
Batteries
: Batteries may leak or explode if improperly handled. Observe the 
following precautions when handling batteries:
• Use only batteries approved for use in this equipment.
• Do not expose the battery to flame or excessive heat.
• Keep the battery terminals clean.
• Turn the product off before replacing the battery.
• Remove the battery from the camera or charger when not in use and 
replace the terminal cover. These devices draw minute amounts of 
charge even when off and could draw the battery down to the point that 
it will no longer function. If the battery will not be used for some time, 
insert it in the camera and run it flat before removing it from the camera 
for storage. The battery should be stored in a cool location with an 
ambient temperature of 15 to 25 °C (59 to 77 °F; avoid hot or extremely 
cold locations). Repeat this process at least once every six months.