Nikon D800 User Manual (en)
En_03
427
n
White balance
bracketing
bracketing
2–9 frames in steps of 1, 2, or 3
ADL bracketing
2 frames using selected value for one frame or 3–5
frames using preset values for all frames
frames using preset values for all frames
Exposure lock
Luminosity locked at detected value with
A AE-L/AF-L
button
ISO sensitivity
(Recommended
Exposure Index)
(Recommended
Exposure Index)
ISO 100 – 6400 in steps of
1
/
3
,
1
/
2
, or 1 EV. Can also be
set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 50 equivalent)
below ISO 100 or to approx. 0.3, 0.5, 0.7, 1, or 2 EV (ISO
25600 equivalent) above ISO 6400; auto ISO sensitivity
control available
below ISO 100 or to approx. 0.3, 0.5, 0.7, 1, or 2 EV (ISO
25600 equivalent) above ISO 6400; auto ISO sensitivity
control available
Active D-Lighting
Can be selected from Auto, Extra high, High, Normal,
Low, or Off
Low, or Off
Focus
Autofocus
Nikon Advanced Multi-CAM 3500FX autofocus sensor
module with TTL phase detection, fine-tuning, 51
focus points (including 15 cross-type sensors; f/8
supported by 11 sensors), and AF-assist illuminator
(range approx. 0.5–3 m/1 ft 8 in.–9 ft 10 in.)
module with TTL phase detection, fine-tuning, 51
focus points (including 15 cross-type sensors; f/8
supported by 11 sensors), and AF-assist illuminator
(range approx. 0.5–3 m/1 ft 8 in.–9 ft 10 in.)
Detection range
–2 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo
• Autofocus (AF): Single-servo AF (AF-S); continuous-servo
AF (AF-C); predictive focus tracking automatically
activated according to subject status
activated according to subject status
• Manual focus (M): Electronic rangefinder can be used
Focus point
Can be selected from 51 or 11 focus points
AF-area mode
Single-point AF, 9-, 21-, or 51- point dynamic-area AF,
3D-tracking, auto-area AF
3D-tracking, auto-area AF
Focus lock
Focus can be locked by pressing shutter-release button
halfway (single-servo AF) or by pressing
halfway (single-servo AF) or by pressing
A AE-L/AF-L
button
Exposure