Nikon D800 User Manual (en)

Download
En_03
69
y
A
Remote Cords
If Record movies is selected for Custom Setting g4 (Assign shutter 
button
0 324), the shutter-release buttons on optional remote cords 
(
0 389) can be used to start movie live view and to start and end movie 
recording.
D
Recording Movies
Flicker, banding, or distortion may be visible in the monitor and in the 
final movie under fluorescent, mercury vapor, or sodium lamps or if the 
camera is panned horizontally or an object moves at high speed 
through frame (flicker and banding can be reduced using Flicker 
reduction
 
0 329). Bright light sources may leave after-images when 
the camera is panned. Jagged edges, false colors, moiré, and bright 
spots may also appear. Bright bands may appear at the top or bottom 
of the frame if the subject is briefly illuminated by a strobe or other 
bright, momentary light source. When recording movies, avoid 
pointing the camera at the sun or other strong light sources. Failure to 
observe this precaution could result in damage to the camera’s internal 
circuitry.
Flash lighting can not be used during movie live view.
Recording ends automatically if the lens is removed.
Live view may end automatically to prevent damage to the camera’s 
internal circuits; exit live view when the camera is not in use. Note that 
the temperature of the camera’s internal circuits may rise and noise 
(bright spots, randomly-spaced bright pixels, or fog) may be displayed 
in the following instances (the camera may also become noticeably 
warm, but this does not indicate a malfunction):
• The ambient temperature is high
• The camera has been used for extended periods in live view or to 
record movies
• The camera has been used in continuous release mode for extended 
periods
If live view does not start when you press the 
a button, wait for the 
internal circuits to cool and then try again.