Canon PowerShot SX280 HS User Guide (en)

Download
1
2
3
4
5
6
7
8
9
10
11
Cover 
Preliminary Notes 
and Legal Information
Contents: Basic 
Operations
Advanced Guide
Camera Basics
Using GPS 
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting 
Modes
Tv, Av, and M 
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
135
Adding a Computer
Add a computer to your list of devices to connect to via Wi-Fi.
Follow these instructions when using a Wi-Fi Protected Setup (WPS) 
compatible access point to establish a push-button connection.
If your access point is not WPS-compatible, establish a connection as 
WPS makes it easy to complete settings when connecting devices over Wi-Fi. 
You can use either Push Button Configuration Method or PIN Method for
settings on a WPS supported device.
Refer to the user guide provided with your access point to check if it supports 
WPS.
Be sure to also read the user guide included with your access point.
1
  Access the Wi-Fi menu.
z
z
Press the <
o> button.
2
  Choose a computer.
z
z
Press the <
o><p><q><r> buttons or 
turn the <
5> dial to choose [ ], and 
then press the <
m> button.
3
  Choose [Add a Device].
z
z
Press the <
o><p> buttons or turn the 
<
5> dial to choose [Add a Device], and 
then press the <
m> button.
X
X
A list of detected access points will be 
displayed in the [Select Network] screen.
Computer Settings for Connecting via Wi-Fi  
(Windows only)
On a computer running Windows, you must configure the following settings
before you can connect the camera to the computer wirelessly.
1
 Confirm the computer is
connected to Wi-Fi.
z
z
For instructions on checking your network 
connection, refer to the computer user 
manual.
2
 Configure the setting.
z
z
Click in the following order: [Start] menu 
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
z
z
In the application that opens, follow the 
on-screen instructions and configure the
setting.
The following Windows settings are configured when you run the utility in
step 2.
Turn on media streaming.
This will enable the camera to find the computer to access via Wi-Fi.
Turn on network discovery.
This will enable the computer to find the camera.
Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
Some security software may prevent you from completing the settings as 
described here. Check the settings of your security software.
COP
Y