Canon PowerShot SX280 HS User Guide (en)

Download
1
2
3
4
5
6
7
8
9
10
11
Cover 
Preliminary Notes 
and Legal Information
Contents: Basic 
Operations
Advanced Guide
Camera Basics
Using GPS 
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting 
Modes
Tv, Av, and M 
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
171
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
Choose [Disable] in [Eye-Fi trans.].
z
z
Press the <
n> button, choose 
[Eye-Fi Settings] on the [
3] tab, and then 
press the <
m> button.
z
z
Choose [Eye-Fi trans.], and then choose 
[Disable].
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the 
camera with its write-protect tab in the unlocked position. For this 
reason, you cannot change settings for an inserted Eye-Fi card if 
the write-protect tab is in the locked position.
Connection status of Eye-Fi cards in the camera can be checked on the 
shooting screen (in regular information display mode) or playback screen (in 
simple information display mode).
(Gray)
Not connected
Interrupted
(Blinking white) Connecting
Not communicating
(White)
Connected
Error acquiring Eye-Fi card 
information*
2
(Animated)
Transfer in progress*
1
*2 Restart the camera. Repeated display of this icon may indicate a problem with the 
card.
Images labeled with a [ ] icon have been transferred.
Choosing [
] mode will interrupt the Eye-Fi connection. Although the Eye-Fi 
connection will be restored after you choose another shooting mode or enter 
Playback mode, the camera may transfer any movies made in [
] mode 
again.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection 
status, as needed.
z
z
Press the <
n> button, choose 
[Eye-Fi Settings] on the [
3] tab, and then 
press the <
m> button.
z
z
Choose [Connection info], and then press 
the <
m> button.
X
X
The connection information screen is 
displayed.
COP
Y