Canon PowerShot SX280 HS User Guide (en)

Download
1
2
3
4
5
6
7
8
9
10
11
Cover 
Preliminary Notes 
and Legal Information
Contents: Basic 
Operations
Advanced Guide
Camera Basics
Using GPS 
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting 
Modes
Tv, Av, and M 
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
98
After you set the shutter speed or aperture value, the exposure level 
may change if you adjust the zoom or recompose the shot.
Screen brightness may change depending on your specified shutter
speed or aperture value. However, screen brightness remains the 
same when the flash mode is set to [
h].
To have the setting you did not configure in step 2 (whether shutter
speed or aperture value) automatically adjusted to obtain standard 
exposure, hold the shutter button halfway and press the <
o> 
button. Note that standard exposure may not be possible with some 
settings.
With shutter speeds of 1.3 seconds or slower, ISO speed is [ ] and 
cannot be changed.
[
D]: Manual
Calculation of standard exposure is based on the specified metering method
).
Still Images
Specific Shutter Speeds and Aperture 
Values ([M] Mode)
Follow these steps before shooting to set your preferred shutter speed and 
aperture value to obtain the desired exposure.
1
  Enter [D] mode.
z
z
Set the mode dial to [
D].
2
 Configure the setting.
z
z
Press the <
o> button, choose 
adjustment of shutter speed or aperture 
value, and turn the <
5> dial to specify 
a value.
X
X
An exposure level mark based on your 
specified value is shown on the exposure
level indicator for comparison to the 
standard exposure level.
X
X
The exposure level mark is shown in 
orange when the difference from standard 
exposure exceeds 2 stops.
Aperture Value
Shutter Speed
Standard Exposure  
Level
Exposure Level 
Mark
Exposure 
Level Indicator
COP
Y