Canon Speedlite 320EX Manual (en, fr, es)

Download
18
FE (flash exposure) lock locks the correct flash exposure setting for any 
part of the scene.
With the flash mode set to E-TTL II/E-TTL autoflash, press the camera’s 
<A> button to enable FE lock. On some cameras, press the <B> or 
<7> button.
1
Focus the subject.
2
Press the <A> button. 
(
8
)
 
Aim the center of the viewfinder over 
the subject and press the <A> button.
X
The Speedlite fires a preflash, and 
the required flash output is retained in 
memory.
X
FEL” will be displayed in the 
viewfinder for approx. 0.5 sec.
 
Each time you press the <A> button, 
a preflash will be fired and a new 
flash exposure reading will be locked.
3
Take the picture.
 
Compose the picture and press the 
shutter button completely.
X
The flash fires when the picture is 
taken.
AFE LockN
 
If the subject is too far away and underexposure may result, the <D> 
icon will blink in the viewfinder. Move closer to the subject and perform 
FE lock again. You can also increase the ISO speed and perform FE lock 
again when using a digital camera.
 
If the target subject is too small in the viewfinder, the FE lock might not 
be very effective.