Canon VB-H610VE Manual (en)

Download
58
Note
• RTP stream URL
rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m
[=r|u|m] is optional and can be omitted. If specified, specify 
only one option.
r: Requests RTP over TCP
u: Requests RTP over UDP
m: Requests multicast
Example: RTP streaming 1 request using RTP over TCP
rtsp://192.168.100.1:554/rtpstream/config1=r
Note that the actual operation is dependent on the RTP client 
application, so the URL does not necessarily specify the 
method used for transmission.
• For H.264, the bit rate control and video quality are determined 
by the settings in [Video] (p. 55).
• Regardless of the [Server] > [Audio Server] > [Audio 
Transmission from the Camera] setting, RTP streaming audio 
will be used.
However, to use audio settings, select [Enable] for [Audio 
Transmission from the Camera] and make the settings.
• The [Access Control] > [User Authority] > [Video Distribution] 
and [Audio Distribution] settings are not used for RTP.
• RTP streaming video may not be viewable on systems using a 
proxy server or firewall. If the video cannot be viewed, contact 
the system administrator.
• If host access restrictions are applied to a client while it is 
streaming using RTP over UDP, it may take from a few to 
several seconds until streaming ceases.