Canon vb-s800d Manual (en)

Download
Detecting/
S
et
ting C
ameras
2
21
Note
Thumbnails can only be displayed for cameras with [Connectable] or [Connectable (error)] displayed for [Connection Status]. 
Thumbnails cannot be displayed when the camera is creating a panorama image or setting the camera angle.
Searching in the Camera List
Filters the cameras displayed in the camera list by a string such as the IP address or connection status.
(1)
[Filter]
You can enter up to 1024 characters as a string to be searched.
If you want to search more than one string, separate them with spaces.
You can also specify a range like “192.168.100.1-192.168.100.20” when searching by IPv4 address.
You can save up to 10 latest strings to which the filter is applied.
(2)
Matching condition
The filtering conditions can be selected for the string specified in [Filter].
(3)
Sets whether the string specified in [Filter] is case-sensitive or not.
The specified filtering conditions are applied and the filtered camera list is displayed.
Click [Clear] to clear the filter. The specified filtering conditions are cleared and all cameras appear in the camera 
list.
Note
You cannot apply another filter to the cameras that have already been filtered with [Apply filter]. [Apply filter] applies to all the 
cameras displayed in the camera list before filtering.
Operations in the Camera List
Selecting a Camera
To select a camera to be set or operated, click a camera displayed in the camera list. The checkbox at the beginning 
of the line for the selected camera is selected and the line is highlighted.
1
In [Filter], enter the filtering condition and select the matching condition from the pull-down.
[Contains any]
Filter the cameras to display the ones that include any of the strings separated with 
spaces.
[Contains all]
Filter the cameras to display the ones that include all of the strings separated with 
spaces.
[Exact match]
Filter the cameras to display the ones that exactly matches the strings entered in the 
[Filter], regardless of the separation with spaces.
The string is not case-sensitive.
The string is case-sensitive.
2
Click [Apply filter].
(1)
(2)
(3)
(3)