Canon vb-s800d Manual (en)

Download
Detecting/
S
et
ting C
ameras
2
25
Authenticating a Detected Camera
Cameras with the [Connection Status] set to [Authentication required] or [Not connectable] in the camera list require 
authentication. Camera settings cannot be configured in this tool until the authentication is completed.
The [Camera Authentication] dialog box is displayed.
(1)
[Administrator Name]
Enter the administrator name for the camera. This is grayed out and cannot be entered if [Authenticate using 
common authentication information] is selected.
(2)
[Administrator password]
Enter the administrator password for the camera. This is grayed out and cannot be entered if [Authenticate 
using common authentication information] is selected.
(3)
[Authenticate using common authentication]
Select this checkbox to perform authentication using the common authentication information (P. 24). If you 
select this checkbox, the administrator name and administrator password specified in the above (1) and (2) 
are canceled.
(4)
[Enable SSL communications]
Select this to connect to the camera using SSL communication. If you select [Enable SSL Communications], 
the self-signed certificate is checked. A message is displayed if you authenticate a camera that has a 
problem with its self-signed certificate and has not been connected before.
(5)
Port number input field
Specify the HTTP port to be used for camera connection. It is typically left as default.
Note
You can confirm whether the camera is authenticated by the password specified in the common authentication information or by the 
password specified in the [Camera Authentication] dialog box, by checking the [Administrator Password] in the camera list.
The [Administrator Password] is hidden by default. To display it in the camera list, change the settings in the [Display Items 
Settings] dialog box (P. 22).
1
In the camera list, select the cameras for which you want to set the authentication information individually.
2
Select [Camera List] > [Camera Authentication].
Alternatively, you can double-click [Not connectable] or [Authentication required] for [Connection Status].
3
Enter the authentication information.
4
Click [OK].
(1)
(2)
(3)
(4)
(5)
Authentication Performed with Common Password
Password Specified in [Camera Authentication] Dialog Box