Canon vb-s800d Manual (en)

Download
28
(2)
[IPv4 Address]
When [IPv4 Address Setting Method] is [Manual], enter a fixed IPv4 address.
When basic settings are configured for multiple cameras, the following specification characters can be used to 
specify a wildcard IPv4 address or specify a range.
(3)
[Subnet Mask]
When [IPv4 Address Setting Method] is [Manual], enter the subnet mask value designated for the corresponding 
network.
(4)
[IPv4 Default Gateway Address]
When [IPv4 Address Setting Method] is [Manual] and the camera will connect to a different subnet than the 
computer, select the [IPv4 Default Gateway Address] checkbox and then enter an IPv4 default gateway 
address.
(5)
[AutoIP]
When a camera compatible with AutoIP is selected, select whether to use AutoIP or not.
(6)
[IPv4 address (AutoIP)]
When [AutoIP] is [Enable], the automatically set IPv4 address is displayed.
(7)
[HTTP Port]
Enter the HTTP port.
Select “80” (the factory default setting) normally.
(8)
[HTTPS Port]
Enter the HTTPS port.
Select “443” (the factory default setting) normally.
Important
If [Auto (DHCP)] is selected as the method to set the IPv4 address, the IPv4 address may not be assigned correctly in certain 
environments, such as when a router is present between the DHCP server and the camera. If this happens, select [Manual] and 
set a fixed IPv4 address.
Specification 
Character
Description
Example
*
This is a wildcard. It can be specified for the first to fourth octets 
of an IP address.
192.168.100.*
 From 192.168.100.1 to 
192.168.100.254
-
Enter this between numbers to specify a range. It can be 
specified for only the fourth octet of an IP address.
192.168.100.100-150
 From 192.168.100.100 
to 192.168.100.150
Important
• An IP address beginning with “127”. (e.g., 127.0.0.1) cannot be set.
• When setting the IP address by specifying a wildcard or range, the IPv4 addresses that already exist in the camera list will not 
be used for the setting.
• When an empty IP address does not exist in the range of a wildcard or range specification, settings will not be configured.