Canon vb-s800d Manual (en)

Download
Detecting/
S
et
ting C
ameras
2
33
You can use this tool to display the camera’s Setting Page or start Viewer. You can also check the operation and advanced 
settings of cameras whose basic settings have been configured.
Depending on the computer environment, you may need to add the camera’s IP address as a trusted site in order to launch 
the Setting Page and Viewer. This tool can be used for the registration process.
Note
Regardless of which browser is set as the standard browser, Internet Explorer is started to display the setting page/viewer of the specified 
camera.
Adding a Camera as a Trusted Site
When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP 
address of the camera to the list of trusted sites.
You can individually add the cameras to the list of trusted sites in the settings of Internet Explorer, but if you use this tool you 
can select multiple cameras in the camera list and add them all as trusted sites at one time.
A message appears for confirming adding to the trusted sites.
A message appears for notifying that adding to the trusted sites is complete.
Note
Adding to the trusted sites is applied after Internet Explorer restarts. If Internet Explorer was running during the above operation, exit 
it and then restart it.
Displaying the Setting Page for a Camera
To set the advanced settings for a camera for which the basic settings are finished, you can open the Setting Page for the 
camera from this tool.
Perform this operation by selecting and setting one camera at a time.
Internet Explorer launches and the [Windows Security] dialog box appears.
The Setting Page for the camera appears.
For Setting Page details, please refer to the camera’s “Operation Guide”.
Launching the Setting Page/Viewer
Important
To ensure security, exit the web browser after completing settings on the Setting Page and after using Viewer.
1
In the camera list, select the cameras to add as trusted sites.
2
Select [Maintenance] > [Add to Trusted Sites].
3
Click [Yes].
4
Click [OK].
1
In the camera list, select the camera for opening the Setting Page.
2
Click [Setting Page].
3
Enter the administrator name and administrator password for the camera and click [OK].