Canon vb-s800d Manual (en)

Download
40
Camera specification files saved in CSV can be edited with a spreadsheet software such as Excel, or a text editor such as 
Notepad.
Camera Specification File Configuration
First line (header)
It is described as follows.
The “ContainsPass” value changes as follows depending on the settings of the [Export Camera List] dialog box at the 
time of saving.
Described only when the “ContainsPass” value for the [Common Authentication Administrator name = Common 
Authentication Administrator Password] is “1” or “2”.
Up to three [Common Authentication Administrator name = Common Authentication Administrator Password] can be 
displayed.
Second line and below (export item)
The export items are described separated by commas in the second line and below. The item name is described in 
the second line, and the third line and below are used to describe camera export items, with one line per camera.
Editing a Camera Specification File
Important
• If you create the camera specification file with Exel, select [CSV (Comma delimited) (* .csv)] when saving.
• If you create the camera specification file with a text editor like Notepad, surround each setting item with double quotation marks, and 
separate the items with commas. Save the file with a .csv extension.
• Up to 64 cameras can be specified in a camera specification file.
• A camera specification file must be saved as UTF-8. Do not save with other encoding when saving.
• If there are more than six commas in the first line (header) or the “ContainsPass” value is other than 0, 1, or 2, an error will occur when 
loading the camera specification file.
• If the number of items described on line two does not match the number of export items on lines three and below, an error will occur 
when loading the camera specification file.
• If a fixed IP address is specified for the IPv4 address, the specified IP address is set even when a camera with the same address exists 
in the same network. Take care that an IP address is not a duplicate of that of an already set camera.
Camera Management Tool,Ver.x.x,ContainsPass=[0|1|2],[Common Authentication Administrator name = Common 
Authentication Administrator Password]
Value
[Export Camera List] Dialog Box Settings
0
The [Save password.] checkbox is not selected.
1
The [Save password.] checkbox is selected and the [Encrypt password.] checkbox is not selected.
2
Both the [Save password.] and [Encrypt password.] checkboxes are selected.
#uuid,Group,CameraName,Status,SettingStatus,IPv4Address,AutoIP,IPv6Address,Model,
FirmVer,Serial,MACAddress,Word,Port,SSL,Notes,BuildNo,Bkup,HWID,SubnetMask,
DefaultGateway,FirmPath,RestoreDefault,User,DHCP,IPv4First,PortFirst
urn:uuid:dddddddd-3333-dddd-3333-dddddddddddd,,"Camera004",1,,,,
[dddd::ddd:dddd:dddd:dddd],VB-XXX,1.0.0,333333333333,33:33:33:33:33:33,,80,0,,
4820,,57,255.255.255.0,,,0,,0,,
Second line
Third line