Canon vb-s800d Manual (en)

Download
Camera Spe
c
ification File Use
3
41
Export item
Item
Description
Remarks
uuid
Unique identifier of the 
camera
Group
Group name
The content entered in the camera list of this tool.
CameraName
Camera name
Within 15 characters
Status
Connection status of the 
camera
0: Not connectable
1: Connectable
2: Authentication required
3: Connectable (error)
4: Admin Required
SettingStatus
Last performed operation
IPv4Address
IPv4 address
AutoIP
IPv4 address (AutoIP)
IPv6Address
IPv6 address
Link local address only
(An address that was set manually or set automatically using RA 
or DHCPv6 is not exported.)
Model
Model name of the camera
FirmVer
Firmware version
Serial
Serial number
MACAddress
MAC address
Described in uppercase.
Word
Administrator password 
for the camera
This is blank if [Save password] was not selected in the [Export 
Camera List] dialog box at the time of saving or passwords were 
not entered individually for the cameras.
If you select [Save password.] but do not select [Encrypt 
password.], the password is outputted without being encrypted.
If you select both [Save password.] and [Encrypt password.], the 
password is encrypted when outputted.
Port
HTTP/HTTPS port for the 
camera
The HTTP port number if [SSL] is set to “0: Disabled”. The HTTPS 
port number if [SSL] is set to “1: Enabled”.
SSL
Whether SSL 
communication
0: Disabled
1: Enabled
Notes
Remarks
The content entered in the camera list of this tool.
BuildNo
Build number
Bkup
Save location for the 
settings backup file
Blank when the save location of the backup file specified in the 
[Environmental Settings] dialog box is the same.
HWID
Hardware ID
SubnetMask
Subnet mask (IPv4)
DefaultGateway
Default gateway address 
(IPv4)
FirmPath
The firmware file path
RestoreDefault
Restores the initial settings 
when the firmware is 
upgraded.
0: Do not restore
1: Restore
Sets whether or not to restore the camera to the initial settings 
when updating the firmware.
User
Administrator name
Blank if an administrator name is not set for each camera and 
common authentication information is used.
DHCP
Whether DHCP(IPv4) is 
enabled
0: Disabled
1: Enabled