Canon vb-s800d Manual (en)

Download
C
amera D
etect
ion/C
onfigu
ration Techniques
4
47
Detecting Multiple Cameras
Import a CSV file with the IPv4 address column edited to detect a batch of cameras.
The header on the first line and the item name on the second line are required. Do not change the strings.
Edit the items in the third and the lower lines except the IPv4 address parts.
Note
You can specify SSL and the port number as a set along with the IPv4 address.
The [Open] dialog box is displayed.
The cameras with the specified IPv4 addresses are detected and added to the camera list.
Note
• If you load a camera specification file in which only the IPv4 address is written below the third line, authentication is performed 
with the settings you specified in the [Common Authentication Information Setting] dialog box. If you load a camera specification 
file when the [Common Authentication Information Setting] dialog box is unspecified (default settings) and no cameras are 
displayed in the camera list, authentication is performed using the common authentication information on the first line of the 
camera specification file (P. 40).
You can also list the administrator name and administrator password along with the IPv4 address. In this case, authentication is 
performed with the listed administrator name and administrator password.
• The camera is not added to the list of cameras if the IPv4 address is incorrect, authentication failed, or the camera did not 
connect correctly.
• Since the connectable cameras are added to the camera list first, the order of the cameras may differ from the camera 
specification file you edited.
1
Save the camera specification file (P. 38).
2
Edit the camera specification file (P. 40).
3
Save the camera specification file in the CSV format.
4
Select [File] > [Open].
5
In [File Name], enter the camera specification file you saved, and click [OK].
First line
Second line
Enter the IPv4 address of the cameras to be added 
to the camera list.