Canon Speedlite 600EX II-RT Manual (en)

Download
29
You can take three shots while automatically changing the flash output. 
This is called FEB (Flash Exposure Bracketing). The settable range is 
up to ±3 stops in 1/3-stop increments.
1
Press the <E> button.
 
Press function button 3 <E>.
X
<g> is displayed and the FEB level 
display is highlighted.
2
Set the FEB level.
 
Turn <9> to set the FEB level, then 
press <8>.
X
The FEB level is set.
 
“0.3” indicates 1/3 stop and “0.7” 
indicates 2/3 stops.
 
When used together with flash 
exposure compensation, FEB 
shooting is performed based on the 
set flash exposure compensation 
amount. When the FEB range 
exceeds ±3 stops, the end of the flash 
exposure level shows <I> or <J>.
g FEBN
 
After the three shots are taken, FEB is canceled automatically.
 
Before shooting with FEB, it is recommended to set the camera’s drive 
mode to single shooting and check that the flash has been recharged. 
When the drive mode is set to continuous shooting, shooting 
automatically stops after three continuous shots are taken.
 
You can use FEB together with flash exposure compensation or FE lock.
 
If the camera’s exposure compensation is set in 1/2-stop increments, 
flash exposure compensation will be up to ±3 stops in 1/2-stop 
increments.
 
You can set FEB to remain enabled after shooting the three shots (C.Fn-
03/p.114).
 
You can change the FEB shooting sequence (C.Fn-04/p.114).