Canon Speedlite 600EX II-RT Manual (en)

Download
66
Wireless Settings
You can check the transmission status by viewing the color of the 
<D> lamp.
You can set whether or not to fire the master unit as a wireless flash that 
controls the slave unit. When master flash firing is set to ON, the master 
unit is fired as firing group A.
1
Display <N>.
 
Press function button 4 to display 
<N>.
2
Set the master flash firing.
 
Press function button 1 <4> to 
set the master flash firing to ON or OFF.
g : Master flash firing ON
d : Master flash firing OFF
The <D> Lamp
Color
Status
Description
Action
Green
Lit
Transmission OK
-
Red
Lit
Not connected
Check the channel and ID.
Blinking
Too many units
Change the master and slave unit total 
to 16 or less.
Error
Turn the master unit and slave unit off 
and on again.
Master Flash Firing ON/OFF
 
If the transmission channels of the master unit and slave unit are different, the 
slave unit will not fire. Set both to the same number or set both to “AUTO”.
 
If the wireless radio IDs of the master unit and slave unit are different, the 
slave unit does not fire. Set to the same number.
Master flash