Canon Speedlite 600EX II-RT Manual (en)

Download
69
a: Fully Automatic Wireless Flash Photography
4
Position the camera and the 
flash.
 
Position them within the range shown 
on page 58.
5
Set the flash mode to <
a
>.
 
Press the <E> button on the 
master unit.
 
Turn <9> to select <Q>, then 
press <8>.
 
The slave unit is set automatically to 
<a> during shooting, controlled 
by the master unit.
 
Check that the firing group control is 
set to <t>.
6
Check the transmission status 
and charge status.
 
Check that the <D> lamp is lit in 
green.
 
When the slave flash is ready, the AF-
assist beam emitter blinks at approx. 
1-second intervals.
 
When C.Fn-20-1 is set on the master 
unit (p.116), the master unit’s beep will 
sound when recharging of all flash 
units is completed.
 
Check that the <Q> icon is lit on the 
master/slave unit’s LCD panel 
(<G> is not displayed).
 
For the master unit’s LCD panel 
illumination, see page 71.
 
Check that the master unit’s flash-
ready lamp is lit.
Slave flash ready