Canon EOS 5D Mark III Instruction Manual (en)

Download
346
3
 Checking the Battery Information
Affixing a serial number label onto all the registered Battery Pack LP-
E6/LP-E6N’s makes it convenient.
1
Write the serial number on a 
label.
 
Write the serial number displayed on 
the battery history screen on a 
commercially-available label approx. 
25 mm x 15 mm / 1.0 in. x 0.6 in. in 
size.
2
Take out the battery and affix the 
label.
 
Set the power switch to <2>.
 
Open the battery compartment cover 
and remove the battery.
 
Affix the label as shown (side with no 
electrical contacts) in the illustration.
 
Repeat this procedure for all of your 
battery packs so you can easily see 
the serial number.
Labeling the Serial No. on the Battery
Serial No.
7c400300
 
Do not affix the label on any part other than as shown in the illustration in 
step 2. Otherwise, the misplaced label may make it difficult to insert the 
battery or impossible to turn on the camera.
 
If you use Battery Grip BG-E11, the label may peel off as you repeatedly 
insert and remove the battery pack. If it peels off, affix a new label.