Canon EOS 5D Mark III Instruction Manual (en)

Download
350
With a commercially-available Eye-Fi card already set up, you can 
automatically transfer captured images to a personal computer or 
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on 
how to set up and use the Eye-Fi card or to troubleshoot any image 
transfer problems, refer to the Eye-Fi card’s instruction manual or 
contact the card’s manufacturer.
The camera is not guaranteed to support Eye-Fi card 
functions (including wireless transfer). In case of an issue 
with an Eye-Fi card, please check with the card manufacturer. 
Also note that approval is required to use Eye-Fi cards in 
many countries or regions. Without approval, use of the card 
is not permitted. If it is unclear whether the card has been 
approved for use in your area, please check with the card 
manufacturer.
1
Insert an Eye-Fi card. 
(p.31)
2
Select [Eye-Fi settings].
 
Under the [51] tab, select [Eye-Fi 
settings
], then press <
0>.
 
This menu is displayed only when an 
Eye-Fi card is inserted into the camera.
3
Enable Eye-Fi transmission.
 
Press <
0>, set [Eye-Fi trans.] to 
[Enable], then press <
0>.
 
If you set [Disable], automatic 
transmission will not occur even with 
the Eye-Fi card inserted 
(Transmission status icon I).
4
Display the connection 
information.
 
Select [Connection info.], then press 
<
0>.
Using Eye-Fi Cards