Canon EOS 5D Mark III Instruction Manual (en)

Download
351
Using Eye-Fi Cards
5
Check the [Access point SSID:].
 
Check that an access point is 
displayed for [Access point SSID:].
 
You can also check the Eye-Fi card’s 
MAC address and firmware version.
 
Press the <M> button to exit the 
menu.
6
Take the picture.
X
The picture is transferred and the 
<H> icon switches from gray (Not 
connected) to one of the icons below.
 
For transferred images, O is 
displayed in the shooting information 
display (p.252).
H
 (Gray) Not connected : No connection with access point.
H
 (Blinking) Connecting : Connection with access point.
H
 (Displayed) Connected : Connection to access point established.
H
 (  ) Transferring
: Image transfer to access point in 
progress.
Transmission status icon
Cautions for Using Eye-Fi Cards
 
If “
” is displayed, an error occurred while retrieving the card 
information. Turn the camera’s power switch off and on again.
 
Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In 
hospitals, airports, and other places where wireless transmissions are 
prohibited, remove the Eye-Fi card from the camera.
 
If the image transfer does not function, check the Eye-Fi card and 
personal computer settings. For details, refer to the card’s instruction 
manual.
 
Depending on the wireless LAN’s connection conditions, the image 
transfer may take longer or it may be interrupted.
 
Because of the transmission function, the Eye-Fi card may become hot.
 
The battery power will be consumed faster.
 
During the image transfer, auto power off will not take effect.