Canon CN-E30-105mm T2.8 L S Brochure (en)

Download
70
usa.canon.com/eos  
71
EOS SYSTEM ACCESSORIES
70
  *  T3 accessories require Remote Switch Adapter RA-N3 with N3-series cameras.
  **  EOS RT, 650, 630 and 620 require Grip GR20 with built-in T3 remote socket.
EF 100mm f/2.8L Macro IS USM • f/5.6 • 1/80 sec.
*  The EOS 5D Mark III and EOS 7D cameras require a firmware upgrade to be compatible with the GPS Receiver GP-E2. Firmware updates are available on each individual product’s  
webpage on the Canon website. See 
usa.canon.com/consumer for our full line of products.
 
†    In certain countries and regions, the use of GPS may be restricted. Therefore, be sure to use GPS in accordance with the laws and regulations of your country or region. Be particularly 
careful when traveling outside your home country. As a signal is received from GPS satellites, take sufficient measures when using in locations where the use of electronics is regulated. 
Note:  When the EOS 7D camera is used with the GP-E2 the following restrictions will apply: a) geotagging function will not work for movies while recording; b) geotagging features will not 
work for movies when using the Map Utility; c) electronic compass information and automatic time setting is not available; d) transmission via the hot shoe is not possible. 
 
* The WFT-E7A requires a firmware update and Interface Cables IFC-40AB II or IFC-150AB II to work with the EOS 5DS, EOS 5DS R and 7D Mark II.
  ** With no obstructions between the transmitting and receiving antennas, and no radio interference. With a large, high-performance antenna attached to the wireless LAN access point.
Wireless File Transmitters and GPS Receivers
Canon Wireless File Transmitters help enable fast, wireless image transfer from EOS cameras  
directly to a computer. Canon GPS
 receivers record location, including latitude, longitude and  
altitude, include a compass, and can track the trajectory of the photographer’s movements. 
Remote Control & Accessories
Canon accessories are the perfect choice to help enhance your EOS System’s  
performance. Whether through recording data or controlling your camera remotely, 
Canon’s own accessories are designed to complement your EOS camera.
Wireless File  
Transmitter  
WFT-E4 II A           
Wireless File  
Transmitter  
WFT-E4A
 
Wireless File  
Transmitter  
WFT-E3A
 
Wireless File Transmitter  
WFT-E2A
 
Compatibility
EOS 5D Mark II
EOS 5D Mark II
EOS 50D, 40D
EOS-1D Mark IV, 1Ds Mark III, 1D Mark III
Description
This wireless transmitter is dedicated to the 
EOS 5D Mark II with firmware upgrade. The 
transmitter is compatible with Wi-Fi Protected 
Setup to connect to a wireless LAN access point 
and automatically leads to the security setting 
for secure image transfer. Images can be stored 
in selected folders and the entire folder can be 
transferred. Added functions include IEEE 802.11 
a/b/g compatibility, WPS compatibility, camera 
linking function, Bluetooth function, media server 
function and WFT server Remote Live View. It 
allows wireless transmission (802.11a, b or g) to 
Mac or Windows computers up to 492 ft.
This wireless transmitter is dedicated to the 
EOS 5D Mark II. The transmitter is compatible with 
Wi-Fi Protected Setup to connect easily to a  
wireless LAN access point and it automatically 
leads to the security setting for secure image 
transfer. Sending a batch of photos wirelessly is 
easy with the WFT-E4A. Images can be stored in 
selected folders and the entire folder can be 
transferred at once. It retains the same features as 
the WFT-E3A including great handling for vertical 
shooting and wireless transmission (802.11b 
or g) to Mac or Windows computers up to 492 ft. 
(150m)** away.
This wireless transmitter is dedicated to the  
EOS 50D and 40D camera. Completely integrated 
design for outstanding handling; includes vertical 
controls. Wireless transmission (802.11b or g) 
to Mac or Windows computers. Three separate 
wireless methods, including wireless remote 
control of camera from computer. Transmits up to 
492 ft. (150m)**, depending on environment and 
computer set-up; wired Ethernet connection up to 
1,000 ft. (330m). Its USB port allows an external 
hard drive to be directly connected to the camera.
Canon’s Wireless File Transmitter WFT-E2A allows 
photographers to transmit images from cameras 
directly to a computer over a wired or wireless 
local area network (LAN), incorporates a number of 
significant features into a robust, camera-powered 
system to make wireless transfer up to 492 ft. 
(150m)** faster, simpler and less cumbersome 
than WFT-E1A. The WFT-E2A is smaller and attaches 
to the side of the camera.
Wireless  
Controller LC-5
 
Remote Switch
RS-80N3 
Timer Remote 
Controller TC-80N3 
Compatibility
All EOS cameras except
EOS 70D, 60D, 60Da, EOS M and Digital Rebel series, 1v Hs, 1v, 3
All EOS cameras except
EOS 70D, 60D, 60Da, EOS M and Digital Rebel series, 1v Hs, 1v, 3
All EOS cameras except
EOS 70D, 60D, 60Da, EOS M and Digital Rebel series, 1v Hs, 1v, 3
Description
•  An extended-range Wireless Controller system designed for EOS 
cameras with N3 remote  
control sockets.
•  Provides remote shutter release capability.
•  Max. transmitter to receiver distance of  
300 ft./91.5m
•  Remote switch to prevent camera shake for super-telephoto or 
macro shots and bulb exposures.
•  Works like a Shutter button, enabling halfway  
or complete pressing.
•  Shutter release lock.
•  Connects to N3-type socket.
•  Cord length: 2.6 ft./80cm.
•  Remote switch with self-timer, interval timer, long-exposure timer, 
and exposure-count setting feature.
•  Timer set from 1 sec. to 99 hrs., 59 min., 59 sec.
•  Easy operations with new dial.
•  Illuminated LCD panel.
•  N3-type connector.
•  Cord length: 2.6 ft./80cm.
Remote Switch
RS-60E3
 
Wireless Remote
Controller RC-6 
Compatibility
EOS 70D, 60D, 60Da, Rebel T6s, T6i,  T5i, T4i, SL1, T3i, T5, T3, T2i, 
T1i, XSi, Digital Rebel XTi/XT, Digital Rebel, ELAN 7 series, ELAN II/II
E
Rebel T2, Ti, 2000, G, X, XS, XSN, IX
EOS 5DS, 5DS R, 5D Mark III, 6D, 5D Mark II,  
7D Mark II, 7D, 70D, 60D, 60Da, EOS M, Rebel T6s, T6i, T5i, T4i, SL1, 
T3i, T2i, T1i, XSi, Digital Rebel XTi/XT, Digital Rebel, ELAN 7 series, 
ELAN II/II
E
, ELAN, Rebel T2 Date, Ti Date, K2 Date, IX, 10S
Description
•  Compact remote switch replicating all the  
functions of a shutter release button.
•  Cord length: 2 ft./60cm.
• Compact design.
•  Operates approximately 16.4 ft/5 m from the camera.
•  Set for either instant shutter release or  
2-sec. delay.
•  Activate mirror lock and bulb shutter functions.
Remote Switch 
Adapter RA-N3
 
Remote Switch  
Adapter T3 
Extension Cord
ET-1000N3 
Extension Cord
1000T3 
Compatibility
All EOS DSLR cameras except EOS 5D Mark II,  
7D, 70D, 60D, 60Da and Digital Rebel series, 1v 
Hs, 1v, 3
N3-compatible cameras
*
, EOS 1
N
 RS, 1
N
, 1,  
A2/A2
E
, RT
**
, 630
**
, 620
**
, 650
**
All EOS DSLR cameras except EOS 5D Mark II,  
7D, 70D, 60D, 60Da, 50D and Digital Rebel and 
Rebel series, 1v Hs, 1v, 3
N3-compatible cameras
*
, EOS 1
N
 RS, 1
N
, 1,  
A2/A2
E
, RT
**
, 630
**
, 620
**
, 650
**
Description
•  Enables old-model, T3 terminal-equipped  
accessories to be connected to cameras with  
the N3-type socket.
•  Enables use of remote control devices with 
standard 2-pin subminiature jacks with  
T3-compatible EOS cameras.
•  Connects compatible EOS cameras with  
Timer Remote Controller TC-80N3 or Remote  
Switch RS-80N3.
•  Cord length:33 ft./10m.
•  Used with any other T3-compatible accessories  
for extension.
•  Cord length: 33 ft./10m.
Wireless File Transmitter
Remote Controllers and Switches
Remote Control Accessories
GPS Receiver GP-E2
 
GPS Receiver GP-E1
 
Compatibility
EOS-1D X, 5DS, 5DS R, 5D Mark III*, 6D, 7D*, 70D, EOS Rebel T6s, T6i, T5i, T4i, SL1, T5, EOS M
EOS-1D X
Description
The GP-E2 allows photographers to geotag their photos. Its compact, lightweight design smoothly 
integrates with the camera’s hot shoe or USB terminal without the need for additional power. The  
GP-E2 automatically adds location information as EXIF data while shooting (latitude, longitude,  
altitude, direction, universal coordinated time (UTC)). An on-board electronic compass supports  
shooting even when held vertically, and the orientation can be displayed on a map with bundled 
software. The camera’s clock can be easily set by the GP-E2’s atomic clock. It can also be used as a  
stand-alone GPS logger.
To be used with the EOS-1D X, the GP-E1 is Canon’s first GPS Receiver. Its compact, lightweight design 
smoothly integrates with the camera’s extension system terminal, allowing the hot shoe to remain  
accessible without the need for additional power. The GP-E1 automatically adds location information  
as EXIF data while shooting (latitude, longitude, altitude, direction, universal coordinated time (UTC)).  
An on-board electronic compass supports shooting even when held vertically, and the orientation can  
be displayed on a map with bundled software. The EOS-1D X’s clock can be easily set by the GP-E1’s 
atomic clock.
GPS Accessories
Wireless File Transmitter     
  
WFT-E7A
Wireless File Transmitter     
  
WFT-E7A (Version 2)
Wireless File Transmitter 
  
WFT-E6A 
Wireless File  
Transmitter  
WFT-E5A
 
Compatibility
EOS 5DS
*
, 5DS R
*
, 5D Mark III, EOS 7D Mark II
*
EOS 5DS, 5DS R, 5D Mark III, EOS 7D Mark II
EOS-1D X
EOS 7D
Description
Wireless File Transmitter WFT-E7A transfers images from cameras directly to a computer via wireless local 
area networks (LAN), and offers a number of enhanced features to improve efficiency for studios and 
media professionals including: wireless support for IEEE 802.11 a/b/g and the latest standard 802.11n, 
which deliver blazing communication speed, camera clock synchronization, linked shooting function, 
Bluetooth support, and auto re-send of images that were not sent during a sending error.
Canon’s Wireless File Transmitter WFT-E6A is 
designed for the EOS-1D X. It transfers images from 
cameras directly to a computer via wireless local area 
networks (LAN), and offers a number of enhanced 
features to improve efficiency for studios and media 
professionals including: wireless support for IEEE 
802.11 a/b/g and the latest standard 802.11n, 
which deliver blazing communication speed, camera 
clock synchronization, linked shooting function, 
Bluetooth support, and auto re-send of images that 
were not sent during a sending error.
This wireless transmitter is dedicated to the EOS 7D. 
The transmitter is compatible with Wi-Fi Protected 
Setup to connect easily to a wireless LAN access 
point and automatically leads to the security setting 
for secure image transfer. Images can be stored 
in selected folders and the entire folder can be 
transferred. Added features include IEEE 802.11a/
b/g compatibility, WPS compatibility, WFT server 
EOS 7D, camera linking function and Bluetooth 
function. It allows wireless transmission (802.11a, 
b or g) to Mac or Windows computers up to 492 ft.
EOS 7D Mark II camera with  
Wireless File Transmitter WFT-E7A (Version 2)