Canon EOS-1D C Manual (en)

Download
80
Steps 1–5 are the same on master and slave cameras.
Connect the EOS-1D X cameras to each other with a LAN cable. When 
there are multiple slave cameras, connect them to a hub with LAN 
cables, and connect the hub to the master camera with a LAN cable.
1
On the [53] tab, select 
[Communication settings].
2
Select [Network settings].
 
Once [Communication func] is set 
to [Enable], you can select [Network 
settings
].
3
Set [Communication mode] to 
[Disconnect].
 
Once [Communication mode] is set 
to [Disconnect], you can select 
[Sync time between cameras].
Synchronizing the Time
Synchronize the camera time between the same camera models.
If the camera models of the master camera and the slave camera are 
different, the time or zone set on the slave camera may differ from the one 
set on the master camera.