Canon CN-E85mm T1.3 L F Brochure (en)
A
S
B
A
S
B
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
Zoom Speed
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
Zoom Speed
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
Zoom Speed
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
Zoom Speed
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
A
S
B
A
S
B
Zoom Speed
Thumb Ring Rotation Angle
ZOOM TRACK
The Zoom Control Range can be restricted. In a conventional analog system, the
same function can be set within a limited range (both the Tele and Wide ends are
within a limited area). With the latest UHD DIGISUPER/DIGISUPER series and
the optional ZDJ-D02 system, the range can be virtually set at any position used
in a production. If desired, this function can be used to memorize an additional
preset zoom position to be used during a production.
same function can be set within a limited range (both the Tele and Wide ends are
within a limited area). With the latest UHD DIGISUPER/DIGISUPER series and
the optional ZDJ-D02 system, the range can be virtually set at any position used
in a production. If desired, this function can be used to memorize an additional
preset zoom position to be used during a production.
“AUX” SWITCH FUNCTION ASSIGNMENT
One of following functions can be assigned to the AUX switch on the ZDJ-D02:
1. Image Stabilizer: To activate/stop the built-in Shift-IS function. (Ref: page 11)
2. F. Hold: To limit the zoom range to a consistent F-number and to stop at
the point of F-drop (Ramping).
3. Video Return Off: If desired, the “AUX” switch can be assigned the function
of disabling the video return switch on the demand.
FEATURES OF THE ZDJ-PO1 DIGITAL SERVO ZOOM
DEMAND FOR THE LATEST UHD DIGISUPER/
DIGISUPER SERIES ZOOM
DEMAND FOR THE LATEST UHD DIGISUPER/
DIGISUPER SERIES ZOOM
In addition to Canon’s optional
ZDJ-D02, there is an introduction of an
optional compact zoom demand, the
ZDJ-P01. In comparison, the ZDJ-P01
is smaller in size and designed to
enhance usability and heighten ease of
operation. When used with the latest
DIGISUPER series zoom lens, it allows for creative use of the Digital Zoom
Functions, such as the Frame Preset Function and Zoom Track Function. As well
as these great features, the ZDJ-P01 is a more affordable option and allows for a
cost effective control system.
ZDJ-D02, there is an introduction of an
optional compact zoom demand, the
ZDJ-P01. In comparison, the ZDJ-P01
is smaller in size and designed to
enhance usability and heighten ease of
operation. When used with the latest
DIGISUPER series zoom lens, it allows for creative use of the Digital Zoom
Functions, such as the Frame Preset Function and Zoom Track Function. As well
as these great features, the ZDJ-P01 is a more affordable option and allows for a
cost effective control system.
CONSTANT ANGLE FOCUSING SYSTEM (CAFS)
The Zooming Effect of Focus is the phenomenon
where the picture size (angle of view) changes
when focusing. However, a 32-bit CPU calculates
and controls the zoom when focusing in order
to counteract this phenomenon. Thus, the
UHD DIGISUPER/DIGISUPER series has
Zero Zooming Effect of Focus.
where the picture size (angle of view) changes
when focusing. However, a 32-bit CPU calculates
and controls the zoom when focusing in order
to counteract this phenomenon. Thus, the
UHD DIGISUPER/DIGISUPER series has
Zero Zooming Effect of Focus.
FEATURES: UHD DIGISUPER/DIGISUPER LENSES
The latest version of the UHD DIGISUPER/DIGISUPER series Studio/Field lenses are developed with advanced technologies,
while keeping in mind possible future production style. In the DIGISUPER series, the Focus and the Zoom servo systems
are digital using a 32-bit CPU as opposed to the conventional analog system. The second generation of Digital Servo offers
functions that were not possible before and the ability to upgrade the CPU for new features and unlimited possibilities in the
future. (The main features can be seen below.)
while keeping in mind possible future production style. In the DIGISUPER series, the Focus and the Zoom servo systems
are digital using a 32-bit CPU as opposed to the conventional analog system. The second generation of Digital Servo offers
functions that were not possible before and the ability to upgrade the CPU for new features and unlimited possibilities in the
future. (The main features can be seen below.)
(Digital Servo System is available for UHD DIGISUPER 86, UHD DIGISUPER 90, DIGISUPER 100, DIGISUPER 100AF,
DIGISUPER 95 TELE, DIGISUPER 95, DIGISUPER 86AF, DIGISUPER 80, DIGISUPER 76, DIGISUPER 60 xs, DIGISUPER 27AF,
and DIGISUPER 27.)
DIGISUPER 95 TELE, DIGISUPER 95, DIGISUPER 86AF, DIGISUPER 80, DIGISUPER 76, DIGISUPER 60 xs, DIGISUPER 27AF,
and DIGISUPER 27.)
FEATURES OF THE LATEST UHD DIGISUPER/DIGISUPER SERIES LENS
AND THE ZDJ-D02, DIGITAL SERVO ZOOM DEMAND
AND THE ZDJ-D02, DIGITAL SERVO ZOOM DEMAND
SHUTTLE SHOT AND FRAME PRESET
Unlike Digital Drive in the portable lenses, two preset memories are available in any combination of Shuttle Shot and Frame Preset.
SHUTTLE SHOT
At the touch of a button, this feature
allows the operator to zoom back and
forth instantly between any two
positions at the maximum speed or
at any desired speed memorized in
the speed preset function in either
direction. It can be used for zooming
to either the tele-side or wider focal length from any starting point to check the picture, then return instantly to the original
focal length. You can “shuttle” between any two zoom positions as you like.
allows the operator to zoom back and
forth instantly between any two
positions at the maximum speed or
at any desired speed memorized in
the speed preset function in either
direction. It can be used for zooming
to either the tele-side or wider focal length from any starting point to check the picture, then return instantly to the original
focal length. You can “shuttle” between any two zoom positions as you like.
FRAME PRESET
A movement to a preset position can, again, be repeated multiple times. The preset memory is not automatically cleared and
the agreed-on framings from rehearsal can be duplicated over and over in an actual production at the maximum speed or at
any desired speed memorized in the speed preset function.
the agreed-on framings from rehearsal can be duplicated over and over in an actual production at the maximum speed or at
any desired speed memorized in the speed preset function.
SPEED PRESET
A zoom speed agreed on during rehearsal can be reproduced accurately. The preset memory is not automatically cleared and
can be repeated as many times as needed.
can be repeated as many times as needed.
Zoom
Focus
Digital
Sensor
Digital
Sensor
32Bit
CPU
Motor
Motor
CPU
CPU
Digital Servo System
OTHER FEATURES
INTERFACE TO OTHER DIGITAL
TECHNOLOGY
TECHNOLOGY
The Digital Servo System is capable
of providing high-speed interactive
communication with a virtual studio
computer or robotics without
D/A or A/D conversion to allow
accurate control.
of providing high-speed interactive
communication with a virtual studio
computer or robotics without
D/A or A/D conversion to allow
accurate control.
PC CONNECTION
By using the Digital Communication
interface on the lens and optional
software, a personal computer system
can be connected to the lens and used
for lens condition.
interface on the lens and optional
software, a personal computer system
can be connected to the lens and used
for lens condition.
CPU UPGRADE
When new additional features are
available through updated software,
the lens can be updated to the latest
version simply by overwriting the
software in the 32bit CPU.
available through updated software,
the lens can be updated to the latest
version simply by overwriting the
software in the 32bit CPU.
HIGH SPEED
High Speed and high repeatability
(zoom: 0.5 sec, focus:0.8 sec in
case of the DIGISUPER 27).
(zoom: 0.5 sec, focus:0.8 sec in
case of the DIGISUPER 27).
AUTO FOCUS FUNCTION
Canon’s unique Auto Focusing
System has been adapted to the
DIGISUPER 100AF, DIGISUPER 86AF,
and DIGISUPER 27AF.
(Please refer to page 7 for details.)
System has been adapted to the
DIGISUPER 100AF, DIGISUPER 86AF,
and DIGISUPER 27AF.
(Please refer to page 7 for details.)
ZOOM SERVO CHARACTERISTICS SELECTION
Zoom Servo characteristics can be selected from several groups of provided curvatures by setting the mode from the ZDJ-D02 operation
panel. Within each group, one of three specific curvatures can be easily chosen by a toggle switch located near the zoom handle.
panel. Within each group, one of three specific curvatures can be easily chosen by a toggle switch located near the zoom handle.
HD
TV
BO
X LENSES (2/3”)
23
22
HD
TV
BO
X LENSES (2/3”)