Nikon KeyMission 360 Quick Setup Guide (en)

Getting Started
If a plug adapter* is included with your camera, securely connect it to the Charging AC 
Adapter. Once the two are connected, attempting to forcibly remove the plug adapter 
could damage the product.
* The shape of the plug adapter varies according to the country or region in which the 
camera was purchased. 
This step can be omitted if the plug adapter comes permanently bonded to the 
Charging AC Adapter.
• Charging starts when the camera is connected to an electrical outlet while the 
battery is inserted, as shown in the illustration. The power-on lamp slowly flashes 
green while the battery is charging.
• When charging is complete, the power-on lamp turns off. Unplug the Charging AC 
Adapter from the electrical outlet, and disconnect the USB cable. 
Charging time is about 2 hours and 20 minutes for a fully exhausted battery.
• The battery cannot be charged when the power-on lamp quickly flashes green, 
possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
Notes About the USB Cable
• Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21 
could result in overheating, fire or electric shock.
• Check the shape and direction of the plugs and do not insert or remove the plugs at an angle.
Notes About Charging with the Charging AC Adapter
The camera can be operated while the battery is charging, but the charging time increases.
Charging the Battery
Power-on lamp
Electrical outlet
USB cable (included)
Charging AC Adapter