Canon EOS Rebel T5 18-55 IS II Kit Manual (en)

Download
25
You can register lens aberration correction/peripheral illumination 
correction data for the lens to the camera, or delete registered data from 
the camera.
For cameras where [Lens aberration correction] is displayed in the 
[Shooting menu], data is registered or deleted for lens peripheral 
illumination correction, distortion correction, and chromatic aberration 
correction. (Data for distortion correction and chromatic aberration 
correction is used during RAW processing on the camera.)
For cameras where [Peripheral illumin. correct.] is displayed in the 
menu, only lens peripheral illumination correction data is registered or 
deleted. You do not have to register correction data for an EF-M lens.
For 
 (firmware version 1.3.0 or later), lens aberration correction 
data for EF Cinema lenses (CN-E lenses) can be registered to the 
camera.
Registering Lens Aberration Correction/Peripheral 
Illumination Correction Data for the Lens in the Camera
1D X
1D C
1D Mk IV 5D Mk III
5D Mk II
6D
7D
70D
60D
50D
REBELT5i
700D
REBELSL1
100D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT5
1200D
REBELT3
1100D
M2
M
1D C
Lens aberration correction/peripheral illumination correction data 
for the EF 200-400mm f/4L IS USM cannot be registered to 
cameras other than 
 
.
1D X
1D C
5D Mk III
6D
70D
REBELT5i
700D
REBELSL1
100D
REBELT4i
650D
M2
M
1
Click [Lens aberration correction] or [Peripheral 
illumin. correct.].
The [Register lens aberration correction data] window or 
[Register peripheral illumination correction data] window 
appears. Lenses for which correction data is registered in the 
camera are displayed with a check mark.
Window names that appear and data to be registered in the 
camera differ depending on the camera. However, the following 
steps are the same.
How to specify settings for 
 differs from that for other 
cameras.
See “Specifying Settings for EOS M2 or EOS M Camera 
Functions” 
.
M2
M
COP
Y