Canon EOS Rebel T5 18-55 IS II Kit Manual (en)

Download
24
Load a fully charged Battery Pack LP-E10 into the camera. The camera 
can use an SD, SDHC, or SDXC memory card (sold separately). The 
captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to 
enable writing/erasing.
1
Open the cover.
 
Slide the lever as shown by the 
arrows and open the cover.
2
Insert the battery.
 
Insert the end with the battery 
contacts.
 
Insert the battery until it locks in 
place.
3
Insert the card.
 
As shown by the illustration, face 
the card’s label side toward the 
back of the camera and insert it 
until it clicks in place.
4
Close the cover.
 
Press the cover until it snaps shut.
 
When you set the power switch to 
<1>, the number of possible shots 
(p.28) will be displayed on the LCD 
monitor.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch