Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E14
Introduction
Basic Sequence of Operations
DISPLAY
[Trk]OFF
Shtl
A 1
A 2
MENU
 IG: 50 
A
Fr1P
Fr1P
[I-Tq]H
[Adj]
DISPLAY
Press the Display switch.
Press the Display switch.
The display is now illuminated.
The display is turned off.
Changes are saved.
Use the control keys to complete settings.
1
2
3
4
Turn on the lens.
DISPLAY
MENU
[Trk]ON
Shtl
A 1
A 2
 IG: 50 
A
Fr1P
Fr1P
[I-Tq]H
[Adj]
Important
For Reference: Display appearance when restoring original settings
Restoring the Original 
Settings
The original settings can be restored, in 
the case of incorrect settings or if you have 
tried some settings tentatively.
For details, see “Resetting Values” 
in “3. Operation in Basic Mode” or 
“4. Operation in Full Mode.”
Basic Mode
ResetAll
User
User:
B
y/n
Full Mode
ResetAll
User
User:
AllUser:
1
y/n
y/n
Note:   For instructions on turning the lens on, refer 
to the camera manual.
Note:   The  display turns off automatically after two 
minutes if no control keys are pressed. (Auto 
Off.) However, the display remains active as 
long as the Fol. screen is shown. In this case, 
it is only deactivated when you press the Dis-
play switch.
Note:   Any changes to settings are saved even if the 
display is automatically deactivated, just as 
they are when it is switched off manually.
 
When the display is deactivated manually, 
changes to settings are saved and the display 
is turned off.
 
However, if the lens is turned off while the 
display is on, changes to settings may not be 
saved.