Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E27
3. Operation in Basic Mode
1
MENU
    Menu screen
See “3.2 Confi guration from the Menu Screen.”
6
[Trk]
    Zoom tracking
Switch to ON when using zoom tracking.
See “3.1.7 Zoom Tracking ON/OFF.”
2
IG
    Auto iris gain
Adjust the auto iris gain value as needed.
See “3.1.3 Specifying Auto Iris Gain.”
7
A 2
    AUX2 switch
By default, the AUX2 switch for a zoom demand 
is assigned to the {Frame Preset 1} function, 
but it can be reassigned as needed.
See “3.1.8 Assigning Functions to the AUX2 
Switch.”
3
A
    AUX switch
By default, the AUX switch for a drive unit is 
assigned to the {Frame Preset 1} function, but it 
can be reassigned as needed.
See “3.1.4 Assigning Functions to the AUX 
Switch.”
8
[I-Tq]
    Iris torque
Adjust the level of torque in manual control of 
the iris ring as needed.
See “3.1.9 Specifying Iris Torque.”
4
[Adj]
    Mechanical end auto-adjustment
Perform automatic adjustment of the mechanical 
end in zoom, focus, and iris operations on the 
lens and drive unit.
See “3.1.5 Auto-Adjusting the Mechanical End.”
9
[Z.M.]
    Zoom curve mode
Adjust zoom speed in response to pressing 
the zoom seesaw switch or tilting the analog 
demand thumb ring.
See “3.1.10 Specifying Zoom Curve Mode.”
5
A 1
    AUX1 switch
By default, the AUX1 switch for a zoom demand 
is assigned to the {Shuttle} function, but it can 
be reassigned as needed.
See “3.1.6 Assigning Functions to the AUX1 
Switch.”