Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

E53

3. Operation in Basic Mode

[ I-Gain ]

Iris

Remote:

90

Auto:

50

[ ]

[ I-Gain ]

Iris

Remote:

90

Auto:

55

[ ]

Iris

[ ]

[ I-Gain ]

Torque:

High

Comp:

ON

[ I-Gain ]

Iris

Remote:

90

Auto:

50

[ ]

[ I-Gain ]

Iris

Comp:

ON

Torque:

High

[ ]

[Trk]OFF

Shtl

A 1
A 2

MENU

 IG: 50 

A

Fr1P

Fr1P

[I-Tq]H

[Adj]

 

Top

Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations. 
Regardless of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users.

Note:   Do the following when 

adjusting gain while checking 
iris operation.

     

→ Confi rm that the drive unit A/M 

switch is set to [Auto] mode.

     

→  Set the camera iris mode to 

[Auto].

Note:   As you look at the lens iris 

ring, set it to the position of 
maximum gain at which “focus 
hunting” does not occur.

Note:   The current iris gain value 

is retained even if you reset 
other settings as described in 
“3.2.1 Resetting Values.” For 
this reason, you will no longer 
be able to view the default 
setting. If necessary, make 
a note of the default setting 
before adjusting this value.

The display switches to the Iris screen.

[I-Gain] is underlined.

The display switches to the [I-Gain] screen.

The display reverts to Screen A.

[Auto] is underlined.

The previous or default value is highlighted.

Press left or right until you reach the desired function.

01

to

99

Default: Varies depending on the factory-set value, but corresponds to 

the value determined with the iris gain adjustment trimmer.

Minimum gain

Maximum gain

MENU

 × 3

Iris

[ ]

or