Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E69
3. Operation in Basic Mode
[Trk]OFF
Shtl
A 1
A 2
MENU
 IG: 50 
A
Fr1P
Fr1P
[I-Tq]H
[Adj]
Info
    
Encoder:
OFF
S/N
IND
ON
Info
CamSeri:
I/Fprior                        
Cable
/ i
IND
ON
Info
CamSeri:
I/Fprior                        
Mount
/ i
3D:
OFF
Specifying the Input Route for Command Signals from the Camera
 
There are two input routes for command signals from the camera: via the mount and via the 12-pin cable. This setting 
specifies the input route for command signals from the camera. The default setting is “Mount,” and in this case command 
signals received via the mount are given priority.
However, the command signals via the 12-pin cable are received automatically if no command signals are input via the 
mount. When the “Cable” setting is selected, only command signals received via the 12-pin cable are used.
Press   once and   twice.
The display switches to the 
Info screen.
Press   five times.
[I/Fprior] is underlined.
Press   or  .
Press left or right to switch the function {Cable} or {Mount}.
Initial Top Screen
Info Screen
Options
(D) 
Mount
Cable
Description
Via mount
Via 12-pin cable
(D): Default value
MENU
 × 2
Info
 × 5
or
1
2
3