Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E86
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
50
Auto:
90
[ ]
[ I-Gain ]
Iris
Remote:
50
Auto:
80
[ ]
[ I-Gain ]
MENU
MENU
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
[Adj]
[ ] 1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
Specifying Remote Iris Gain
 
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch 
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Options
01
to
99
Description
Minimum gain
Maximum gain
Default value: 90
MENU
 × 2
[I-Gain]
 × 2
or
Note:   Do the following when 
adjusting gain while checking 
iris operation.
     
→ Confi rm that the drive unit A/M 
switch is set to [Auto] mode.
     
→  Set the camera iris mode to 
[Remote].
Note:   The current iris gain value 
is retained even if you reset 
other settings as described in 
“4.2.1 Resetting Values.” For 
this reason, you will no longer 
be able to view the default 
setting. If necessary, make 
a note of the default setting 
before adjusting this value.
1
2
3
4
5
Press 
 twice.
Your selection is now highlighted.
Press 
.
The display switches to the [I-Gain] screen.
Press 
 twice.
[Remote] is underlined.
The previous or default value is highlighted.
Press 
 or 
.
Press left or right until you reach the desired value.
Press 
.
The display reverts to Screen A.
Initial Top Screen
Screen A
[I-Gain] Screen