Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E112
4. Operation in Full Mode
(3) Responding to Errors
If copying between lenses fails, check the following.
Error Screen
Checking Item
Problem
Responding
Lens Connect
Error!!
Confi rm that the dedicated cable 
(20 pin–20 pin) is connected.
Settings cannot be copied 
between lenses unless the 
cable is connected.
Securely connect the cable 
between the source and target 
lenses, and follow the steps to 
copy again, from the start.
Confi rm that the target lens is 
on.
Settings cannot be copied 
unless both the source and 
target lenses are on.
Turn on both the source and 
target lenses, and follow the 
steps to copy again, from the 
start.
Confi rm that the drive unit of the 
target lens is the same model.
Settings cannot be copied 
between lenses of different 
generations of drive units.
Contact Canon or your dealer 
for details on models of drive 
unit that can be used to copy 
settings.
Copy Error!!
Confi rm that the dedicated cable 
(20 pin–20 pin) is connected.
The message at left is displayed 
if the lenses are disconnected 
during copying, if a power 
outage occurs, or if a lens is 
turned off. In this case, copying 
is interrupted, which prevents 
the settings from being copied 
correctly.
Confi rm that the source and 
target lenses are on, and that 
the cable is securely connected. 
Press the Display switch to 
return to Screen A, and follow 
the steps to copy again, from 
the start.
Confi rm that the source and 
target lenses are on.
Screen A
User
Copy
ToOtherLens
1
Access:
Unlock